Planning Your Outdoor Wood Furniture

Wood outdoor furniture can be a lovely addition to your outside living areas and something to be proud of when entertaining friends and family. Sometimes you may consider metal, plastic or synthetic furniture, but outdoor furniture made of natural wood provides unsurpassed beauty and elegance.

The reality is while all wood furniture looks great when you first put it outdoors, most woods, especially softer woods, will begin to crack and eventually splinter and break during the harsh winter months. Not all woods are strong and weather resistant enough to last long in wind, rain, snow and other weather but I will get to that momentarily.

First off, when selecting the type of wood outdoor furniture, you might want to consider these important factors:

How durable must your furniture be? What will it be used for, how often, etc…
What is the landscape of your outdoor surface? Choose based on your surface outdoors, i.e. grass, trees, rocks…
The climate will matter, will your furniture be subjected to harsh hot and humid summer days? or northern dry sub-zero climates?

Most woods can’t handle outdoor exposure, but those that can are remarkably sturdy. Let’s take a look at a few of the more common types of wood selected for outdoor furniture


Mahogany is a very popular wood that gets darker over time and has a red glow after being polished. The downside is it can be a bit on the high end in terms of cost.


Redwood primarily comes from trees in the northwest U.S. and is very resistant to moisture and decay. It is lightweight and valued for its beauty. Because redwood lacks resin, it is also resistant to fire.


Rattan furniture is made from palms and is a slender reed-like tree most commonly used in chairs and baskets. Wicker, the synthetic outdoor material, is generally modeled to look and feel like Rattan.


Cedar is relatively soft when compared to the other outdoor woods. It can absorb moisture, allowing it to handle moist environments without rotting. Also, the wood and oil of cedar are natural repellents to moths. Cedar will turn a lovely silver-gray as it ages and you can leave it out in the elements for its lifetime. One of the great things about cedar is you can leave it untreated because it won’t shrink or become warped over time.


Teak is a wonderful hardwood that you’ll often find on the deck of sailing boats and yachts. It contains natural oils that make it resistant to decay, insects, and bacteria. It is durable with or without oil or varnish treatment. It can withstand changes in weather and seasons. It is a hard, strong and beautiful wood that is sturdy, and doesn’t rot even when paired with metal. Teak is also simple to carve for creative designs in your patio furniture. However, teak’s long growth period of 50 or so years has made it more expensive and harder to find. If you don’t treat the teak it will go from its initial warm honey color to a silver-gray patina over time.

These woods hold long-lasting beauty and any furniture made of these three kinds of wood make a striking addition to any yard.

Other less common woods to consider in outdoor furniture are balau, Brazilian cherry, eucalyptus, ipe, iroko, Jarra and kempas, all alternative woods that are slowly becoming more popular over time. Regardless of which material you use, make sure it is made by a quality furniture store that excels in providing weather-resistant furniture. You want to enjoy the furniture for years to come!

Simple Wood Bending Method

The idea of bending wood into arches and other curves can be quite daunting if you’ve never done it before. How often have you gazed in wonder at the beautiful intricate shapes of wooden architecture, marveling at the sheer creativity of the workman? Such extraordinary shapes and designs can be made only with the aid of bended pieces of wood.

There are a few popular ways to bend wood including steam bending, kerf bending, microwave bending, laminate wood bending.

For my projects, I tend to use the laminate method and so I’d like to share with you a how-to video I like that describes this process very well.

Wood Bending Method

As demonstrated, this particular type of bend is called a bent lamination where you use multiple layers of wood with glue in between them bent around a form and clamped down. When the glue dries, the wood retains its shape.

The first step is to make a bending form. First cut the outside radius with help of the table saw, then inside radius small enough so that your clamps will reach over the form and the piece you are bending.

Next, you rip the strips, keeping aware that they can be pulled down into the table saw through the throat plate. To avoid this, you should replace your throat plate with a zero clearance throat plate.

After this, you will rip the strips. To do this, you must get a good set of screwdrivers. You’ll see how this is done in the video. You then make a pass shaving off the edge of the board to the closest 1/8 inch. Repeating this will give you several bendable laminate strips ready to be glued and bent.

Apply the glue with a roller. Roll out the glue on the strips, stack your glued strips, then clamp them to the curved form. Whenever possible, use a pad so you don’t mark up or dent your wood. Start with the center.

Repeat this clamping process until all the strips are curved and clamped to the form. Let it dry for 8 hours or more, unclamp the form and viola! A nice consistent curve the exact shape of your form every time.

Tasty Cooking on Wood Burning Stoves

This may be a bit off topic but I would love to talk a bit about wood-burning stoves since I am currently researching and shopping for one. In these times of carbon footprint awareness and cost of living considerations, now might be a great time to take another look at the old-fashioned wood-burning cook’s stoves that our grandparents or great-grandparents used to use. I don’t know about you but when someone mentions wood cooking stoves, images of Victorian-era kitchens and cast iron hearths come to mind. They have been in use for hundreds of years, in fact, before the advent of electricity, people did all of their cooking on wood stoves. In 1742, Ben Franklin invented what is known now as the “Pennsylvania Fireplace” as an alternative to open fireplaces used in Colonial America.

Nowadays, wood burning cook stoves while ideal for remote locations without electricity, have the added benefit of using a renewable resource, wood. If sourced locally, wood is a very green fuel. Wood is still much less expensive than gas or electricity (barring solar or wind-generated electricity of course).

Wood burning stoves can be used as space heaters, and I’ve found that many can also accommodate a boiler to supply hot water.

While top-end new stoves can cost upwards of $2,000, you can probably find a great deal on a used or antique wood burning stove on craigslist or at local flea markets or yard sales.

Wood cook stoves are a great alternative to conventional gas or electric stoves. They save energy and can make food taste much much better!

Build Your Own Boot Butler

I would like to share with you how to build a boot butler. I don’t know about you but I find it difficult to stow away all the shoes and boots that accumulate at the home entry. I built this simple “Boot Butler” to stash them away yet keep them easily accessible:

Start by downloading the assembly diagram here: Boot Butler Assembly Diagram

1. Cut the Plywood Parts

Cut all of the following parts with a hybrid table saw and straight edge (refer to the cutting diagram at left to see how to lay out and cut all the parts from one sheet of plywood): seat (A), seat underlayment (B), leg panels (C), frame side (D), stretchers (E), shelf (F) and stiffener (G). Smooth out the sides of the legs, the top edges of the stretchers, and all the edges of the seat and underlayment with a sander or a router and 1/4-inch round over bit.

2. Assemble the Shelf

All the plywood parts are connected with screws and glue. Before you drive the screws, drill counterbores for the screw heads that are just deep enough to be filled with wood filler or putty. Attach the stretchers and shelf by drilling four evenly spaced 3/is-inch diameter pilot holes through the outside edges of the stretchers and into the front and back edges of the shelf. Keep the screw holes at least 2 inches from the ends of the stretchers to prevent splitting when you drive the screws. Glue the joints (drawing 1), and drive 2-inch deck screws through the pilot holes and into the shelf.

3. Build the Box Frame

Now attach the two frame sides (D) to the ends of the shelf assembly. To accomplish this, mark the location of the parts onto the frame sides. Begin by measuring and marking a line 2 inches up from the bottom edges of each frame side. This is where the lower edges of the stretchers will fit when the stretchers are installed.

The stiffener (G) is positioned between the frame sides at the top center points to provide stability to the box frame. Mark the stiffener position, making sure the top of the stiffener is flush with the tops of the frame sides, and apply glue to all the joints. Clamp the stretchers and stiffener in position with bar clamps. Drill two evenly spaced 3A&-inch-diameter pilot holes through each frame side and into the ends of the stiffener. Drive the 2-inch deck screws to secure the stiffener (drawing 2). For extra shelf support, drill pilot holes and drive a screw through the center of each frame side into the shelf

4. Complete the Leg Assembly

Attach leg panels (C) to the outer faces of the frame sides to provide wider, more stable support points for the seat. Put wax paper or newspaper on your work surface to catch any excess glue, then apply glue to the outer face of each frame side, and to the inner face of each leg panel. Press the leg panels against the frame panels, centered side to side to create a 1/2-inch reveal on each side of each frame panel. All top and bottom edges should be flush. Clamp each panel pair together, then secure with counterbored 1 1/4-inch deck screws driven through the frame panels into the leg sides. Check the box frame to make sure it is square by measuring diagonally from corner to corner, across the tops of the leg assembly. Use a pipe clamp to draw the frame together until it is pulled into the square, and the diagonal measurements are equal.

5. Attach the Seat Assembly

The seat is made from two sheets of plywood: a 3/4-inch thick underlayment (B) layered together with the plywood seat (A). Lay the underlayment on a flat surface, then flip the leg and shelf assembly upside-down and center it on the bottom face of the underlayment. Outline the edges of the frame onto the underlayment for future reference (drawing 3). Flip the leg and shelf assembly upright, and apply glue to the tops of the legs and stiffener. Position the underlayment on the assembly according to the alignment marks. Drill 3/16-inch-diameter counterbored pilot holes through the underlayment into the legs and stiffeners, then drive 2-inch deck screws.

Apply a thin layer of glue to the top of the underlayment and the underside of the seat. Position the seat onto the underlayment so the overhang is the same on all sides. Set heavy weights on top of the seat to help create a solid glue bond (drawing 4). Drive evenly spaced, counterbored 11/4-inch deck screws through the underlayment into the seat. Finally, cut the aprons (H) from 4-inch wide pine ranch molding. Position the aprons so the tops are flush against the bottom edges of the underlayment, overlapping the edges of the frame panels slightly. Attach with 8d finish nails.

6. Apply Finishing Touches

Fill all of the countersunk screw holes and plywood edges with wood putty and sand smooth. Apply primer and paint we painted our boot butler with cream-colored exterior latex enamel paint. For a decorative touch, stencil or sponge-paint the surfaces.

Great Woodworking : Creating Gorgeous and Resilient Furniture

Generally, in most woodwork organizing, there is fine woodworking regarding projects inside creating home furniture. The principal idea is to acquire a top quality policy for your furniture which will include the style, material as well as the cost. Wood is without question the most wonderful material when coming up with furniture regarding fine woodworking. It really is solid, good to touch and possesses an earthy sense and smell with it. Fine woodworking inside creating furniture can be an art and you may make strong and resilient and may be created directly into any shapes to accommodate the area. Wood is employed mostly in household furniture and ornaments. Because regarding its multipurpose use, most people believe it is very convenient to use.

It just isn’t difficult to generate fine woodworking regarding furniture, as carpenters are usually skilled with making any forms of designed furniture to your specific wants. Planning any woodworking project is important if you are making home furniture. You will make great ideas for indoor along with outdoor home furniture. You will see many forms of woodwork ideas online regarding fixtures, accessories, designs and also drawings to your woodwork venture. There are usually some websites that provide free, cost-effective, expensive and also superior top quality designs to your fine woodworking ideas.

Outdoor Home FurnitureOutdoor Home Furniture

Whoever possesses a huge or tiny backyard or even a lawn inside the front of these houses, know the worth of top quality furniture. Creating out of doors furniture is an enjoyable hobby for many who are enthusiastic about woodworking. You’ll be able to make high-quality furniture in a more affordable way. It is possible to create out of doors fine woodworking regarding furniture just like, a eat outside table, benches, secure armchairs and also barbeque caddies. The ideas for out of doors furniture is found online that may easily information new carpenters. After producing your patio furniture with great woodworking, you ought to paint these with layers for weather conditions protection and also place them in the shaded spot.

Indoor Home Furniture

Indoor Home Furniture

Most great woodworking regarding furniture is completed with softwood as it is mild and an easy task to work about. Furniture is manufactured out of a selection of woods and is dependent upon the nature with the furniture bit. For illustration, if you’ve planned on woodworking regarding bookshelves and also chairs, you’ll need a solid kind regarding wood, while attractive pieces or perhaps side tables may be created together with woods which can be lightweight. To do this, you must get a good set of screwdrivers. When coming up with furniture coming from hardwoods which can be obtained coming from trees just like teak, pine, mahogany, ash, walnut and also birch, maximize attractive and finest quality furniture. They’re also useful for flooring, making doors and windows because of this durability.

You should obtain high top quality software regarding woodworking plans which can be quite pricey but offers you efficient plans to your woodworking jobs. These are a straightforward alternative and present you appropriate guidance regarding fine woodworking if you are on woodworking jobs. This computer software is the compilation with the works regarding experienced and also expert woodworkers, so you’ll get a lot of designs and also plans regarding woodworking to assist you to succeed. Nonetheless, before acquiring woodworking ideas software, make certain that the ideas offered included providing total information regarding fine woodworking as well as the instructions regarding helping help make great home furniture.